That 3 groove pulley requires lots of torque (258 ft lb) whereas the
single groove pulley only takes 43 ft lb.  Is it possible that someone
at some time had that pulley off and didn't torque it back correctly?
If so, It's probably worn to the point of being useless now (along with
the key).  The worst case scenario would be if the keyway on the
crankshaft has gotten beaten out of shape.

I hope it's simpler than that.

Mike

Geza Polony wrote:
> No, it's a three-groove pulley as the van is an '84 Wolfburg Westy with AC
> and PS...and it's wobbling all over the place.
>
> Someone told me the crank could be bent but I don't see how it could hold
> oil in if it were bent that bad. No leaks at the rear seal.
>
> ?
>