Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
VanagonEuroVan
Subject:Re: Will an early Subaru engine fit the Vanagon?
From:rpc
Date:Fri, 16 Nov 2007 18:04:26 -0800

Question for the subaru people; I am curious.  We know you can find a subaru engine and fit it in a Vanagon.  What extra work is required to Reconnect the A.C.?  Cruise control?  Will my tach and speedo work?  All this stuff works fine, as is, with my water-boxer.
  Thanks,
  Chris C
  90 MV

  ------------------------------------------------------------------------------------------------------
  If the 1991 is, indeed, a LEGACY and not a LOYALE, it will have the
2.2L "EJ22".  That engine is the most popular version used in Vanagons.

Just to make absolutely sure, look under the left rear corner of the
alternator.  You should see "EJ22" cast into the block in a rectangular
frame.

It's worth checking because I bought a Legacy doner car one time and
 didn't
check and an unscrupulous mechanic had swapped in a JDM EJ20 instead of
 the
EJ22...telling the owner (a  woman) he had replaced the EJ22 with
a "rebuild".

I recommend buying a whole "doner car"...over junkyard engines because
 you
will be sure to get everything you need and you can hear the engine run
 and
verify the mileage and condition in advance. But if you're hiring
 someone
to pull it from a junkyard, both you and the person doing the pulling
should be very clear about all the parts your going to pull.  (If you
 get
serious about this, P-mail me and I'll send you a complete list.)
Junkyard "contractors" are a "different breed"...and used to doing
 things
the fastest, easiest way...which usually means cutting or breaking
 things
for expediency...so make sure you get one that will listen to your
instructions and remove things carefully.

When getting a quote to pull the engine, make sure they realize they
 will
also have to pull the complete, UNCUT wiring harness from the engine
 bay,
from under the driver's side front fender, and also behind the
dashboard,.... after removing the whole dashboard as well as the
 heater/AC
unit from the interior firewall....a fair bit of work....as much work
 as
pulling the engine from the engine bay.  I've paid from $125-$200 to
 get
everything. I can also supply you with a Word document that has
 detailed
instructions on how to pull the harness.

Warren C.
Moderator
SubaruVanagon Yahoo Group

Have something to add on this topic today? Revive this thread in the forum »