Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Fuel pump relay cutout switch
From:Jake de Villiers
Date:Thu, 15 Nov 2007 14:49:46 -0800

Good point Mark, but the suggested approaches still apply. You could put a
switch in the fuel pump feed that's under the van and kill it that way.

On Nov 15, 2007 2:28 PM, Mark Drillock <mdrillock@cox.net> wrote:

> I guess few noticed that he said he has a SUBARU conversion. Without
> specific info about the wiring modifications that were made in HIS
> conversion it may not help to suggest approaches that presume VW ECU and
> VW support wiring.
>
> Mark
>
> Scott Daniel - Shazam wrote:
>
> > Thanks for saying what you are trying to accomplish.
> > Your idea is sound, and you could interrupt any of 3 wires at  the fuel
> pump
> > relay,
> >  - the 'supplies ground' signal from the ECU.
> >  -the power supply wire to the relay,
> >  - or the 'hot signal coming out' wire that goes to the fuel pump.
> > I'd access the fp relay in that black box above the coil, figure out
> which
> > is the main relay and which is the fuel pump relay and proceed
> carefully.
> >
> > It really is clearly indicated in the Bentley current flow diagrams, tho
> > they are funny to read at first for sure, but if you find the current
> track
> > for 'fuel pump' .....you should be able to see the pump, and the relay,
> even
> > how it works internally, if you understand the basic principle of a
> relay
> > anyway. .  They don't always show things really well, but on these basic
> > circuits, they're ok.
> > Scott
> > www.turbovans.com
> >
> >
> > -----Original Message-----
> > From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf
> Of
> > David O'Bryan
> > Sent: Wednesday, November 14, 2007 3:01 PM
> > To: vanagon@GERRY.VANAGON.COM
> > Subject: Fuel pump relay cutout switch
> >
> > Help.  I'm helpless when it comes to reading a current diagram (but I
> really
> > did try).  I want to install a cut out switch on the wiring to the fuel
> pump
> > relay and cannot figure out which wire from the ignition switch area
> will do
> > that.  I want to run the lower power wire that energizes the relay thru
> a
> > switch as an anti-theft device.
> >
> > Any help is appreciated.  :-)
> >
> > Regards,
> >
> > Dave O
> > '87 Westy
> >
>

--
Jake
1984 Vanagon GL
1986 Westy Weekender "Dixie"
www.crescentbeachguitar.com
http://subyjake.googlepages.com/