

| Subject: | Re: 3 speed heater fan switch in canada ?? |
| From: | neil N |
| Date: | Thu, 29 Nov 2007 09:37:46 -0800 |
I recall posting here a while back about the same thing. Looks interesting what you came up with. For sure don't use this. I posted it here: http://web.mac.com/tubaneil/iWeb/Site%205/HotSwitch%21.html IMHO, it's a risk to have that heat near wires under dash. You may find the same issue with the heat sinks on the switch you point to though I'm certainly no expert! :) Basically between the list and my own thoughts, I figured it was just fine to use the stock switch. Yes it eventually fails, but IIRC, they can be found for not a lot of money. I had thought that one could use a DPDT "on-off-on" switch. Like a real HD one. Only two speeds, but why not just have med/hi or low/hi only? Just a thought, Neil. On 11/29/07, TC <trclark@shaw.ca> wrote: > > > Q for any west coast cdn > > I cann stealer they want $45 for the 3 speed fan switch that van-cafe > sell > > for $13 > > > > http://www.van-cafe.com/vanagon_parts.jsp?pa=p&p=252242103&pct=1471293086&ct > > =1354137046 > > > > so b4 I give few more buck to the nice guys in santa cruz any body know > an > > alt src in bc > > for this switch or a compatible part > so I read some & got some PM mails about alternatives so I looked around > and > I was just wondering what you guys > think of this option for switch replacement > http://store.qkits.com/moreinfo.cfm/MXA066 > > POINT + 12 V is connected to the positive pole of the power supply 12VDC > POINT + M is connected to the positive pole of DC Motor. > POINT M is connected to the negative pole of the DC Motor. > POINT G is to be connected to the negative pole of the power supply. > > I dont have switch in front of me but I assume > switch position 3 lead from the blower motor would go to POINT + M > the brown grd wire on the switch goes to POINT M > then power from the fuse panel goes to POINT + 12 V > and run a grd line from the star grd beside the fuse panel connector to > POINT G > > What i like here > 1) I bypass the the resistor on the blower for ever > 2) variable speed control on the heat I finnaly get it just right :) > > commments > -- Neil Nicholson. 1981 Air Cooled Westfalia - "Jaco" (Bustorius) http://web.mac.com/tubaneil Engine swap beginings: http://musomuso.googlepages.com/home
Have something to add on this topic today? Revive this thread in the forum »