Your really lucky as I'm not very busy and ETKA has the lengths of these
for the
Syncro ONLY... stock two wheel drive is not in there..... ether is Jettas

Anyway the right front is 925 MM and the left front is 145 MM  from
end to end if I recall correctly.....  you do the math...

robert feller wrote:

>Anyone stab a guess to what length I need on front left syncro? Seems to be
>a conflict here with the availability of the metric bubble flare on FLAPS in
>all sizes...
>
>If someone could guess some sizes I can do some reseach on many FLAPs sites.
>
>Additionally, do we recommend the stainless flex lines be replaced all
>around for the rubber ones?
>
>On Dec 24, 2007 11:34 PM, Karl Mullendore <groups@westyventures.com> wrote:
>
>
>
>>OK, so bubble flare is what I've been referring to (incorrectly?) as
>>double. And yes, bubble flare brake lines are everywhere in automotive
>>stores.
>>
>>The Vanagon system splits front/rear, not diagonal. So you basically
>>have rear brakes only at this point. :-)
>>
>>robert feller wrote:
>>
>>
>>>Is the junction I'm looking for simply a split valve or is this a
>>>
>>>
>>regular
>>
>>
>>>assembly too? Anything tricky about it?
>>>
>>>Are vanagon diagnal systems or forward/back? I'm curious to what brakes
>>>
>>>
>>are
>>
>>
>>>working with my front left "offline".
>>>
>>>
>>
>>
>
>
>--
>Shawn Feller
>Ohio
>www.carboncow.com
>
>
>