Your right Ken, I do have 2.1 heads.  But all I did was put the new
Victor Reinz gasket (that can with the engine kit) to the head and
noticed that the gasket openings were a little smaller than head intake
ports.  Then I placed the gasket on the intake manifold and I could see
that the intake manifold ports were smaller than the gasket openings.
The intake manifolds are from a 1.9 (I have two pairs and they were both
the same)

I will place the gaskets on my 1.9 heads tonight to see if there is any
big difference in the port size.

Pascal 

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf
Of Ken Lewis
Sent: Monday, January 21, 2008 11:28 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: port matching intake manifolds to heads

Pascal,
That's interesting because I recall all those ports being pretty well
matched the last time I was putting an engine together. Could you have
the
heads off a 2.1L maybe?
Ken Lewis
http://neksiwel.20m.com/