

| Subject: | Re: Propex and outside temperature |
| From: | Mike Collum |
| Date: | Thu, 31 Jan 2008 00:52:13 -0500 |
Thanks Richard. I understand the propex works better if the pressure is changed to 14" and, for that reason among others, I will probably put a dedicated tank and regulator on the passenger side. Mike Richard A Jones wrote: >> How low can the outside temperature go (outside westy propane tank) and >> a propex furnace, at or near sea level, still operate? > > Propane freezes at -304 degrees F, so don't worry. ;-) > > Actually, what matters is its boiling point, since you need it > to go from liquid to gas to run your furnace. That is -43 F. > > The Vanagon propane tanks have a two stage regulator to better > control pressure in cold temps. If there is moisture in the > propane, it can freeze when the pressure is reduced. A two > stage regulator is better at producing an even, desired pressure > in cold weather than a single stage. BBQs don't care.... > > I have a Carver P4. The lowest temp that I have started it > at is 23 degrees F. Because it expects higher pressure than > we use here in the US, it takes a few tries to start at cold > temps. Maybe 4, a few times 6. The Propex is probably > similar unless it has an orifice sized for 11" of water, > NA propane pressure standard. (British standard pressure > equals about 15" of water. See http://jones.colorado.edu/jones/PropaneFacts > > Richard >
Have something to add on this topic today? Revive this thread in the forum »