

| Subject: | Re: Gas tank out. How to remove debris from tank? (searched) |
| From: | John C... |
| Date: | Fri, 22 Feb 2008 14:10:56 +0000 |
As Always, Folks; When Atomizing Carb Cleaner With Air Pressure.... (or anything else ) Wear a Mask With the Appropriate Fume Cartridge... This of course applies to Paint (especially Epoxy ) and Sanding / Grinding dusts. COPD is a real concern for later life. not to mention the big "C" Be Careful It's a Jungle Out There !!! JC.... ;o) -------------- Original message -------------- From: neil N <musomuso@GMAIL.COM> > Thanks Scott. As always very informative. > > I almost got to the point of using "biodegradable" grease remover and > flushing the remains out on my weed riddled lawn, but thought better > of it --- ;^) > > I have decided to go with a new fuel tank. A Brazilian offering from > California Imports. > > The old tank could well be 28 years old. Given that I live up here in > B.C. on the "wet coast", the tank has likely been replaced though. > > On the Samba list, I searched around and found an interesting pic of a > tank cut in half. It showed the screen etc. I don't think my tank has > that. All I saw was the "divider". > > In this case, new, for me, is the best choice. By the time I dick > around with chemicals and the learning curve, the $167 Cnd for a new > tank seems quite reasonable. > > Thanks for the info though! --- :^) > > Neil. > > > > On 2/21/08, Scott Daniel - Shazam wrote: > > Kerosene ? > > In the past on 'normal gas tanks' I have washed them out with water, even > > soapy water, then blew them out with compressed air, then dried them in hot > > sun and then put a water absorbing additive in the fuel if I felt I needed > > to, and done just fine. > > > > But vanagon gas tanks are 'different' .........i believe there is a sump > > screen inside where you can't see it or get to it without cutting the bottom > > of the tank open. > > You can however 'treat' that area by putting liquid chemtool ( carb cleaner > > ) down the feed line. > > Just try blowing it out with compressed air for starters. > > I am WAY big on restoring and cleaning and refurbishing parts on > > cars......... > > Hate to just 'throw stuff away' and often new aftermarket stuff isn't as > > good as OE. > > But fuel tanks on vanagons............ > > 2WD gasoline ones..........for sure, in your case if it was a customer job I > > was doing ............ > > I would just tell the people..........if you want to be SURE ......that your > > gas tank keeps working and doesn't clog up, this old tank has to go. > > I wouldn't say that if it didn't have the hidden sump screen or whatever > > sump thing it has. > > I had a diesel one clog up once..... > > And I was 100 % certain that's what it was.......... > > And the tank looked as clean as a whistle inside........... > > And my radiator shop at the time was very reluctant to cut open the bottom > > in the middle there.............but they finally did, and sure > > enough..........it was clogged up in there. They were a little embarrassed > > and apologetic about it.........but that's what it was.......a clogged sump > > area. > > New aftermarket tanks are around 200 bucks. > > Want a used one to play with ? > > I got those too, and no junk in them either. > > Not trying to sell you a used tank at all really......... > > But your tank is, after all.........what ? .............28 years old ? > > Scott > > www.turbovans.com > > > > -----Original Message----- > > From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of > > neil N > > Sent: Thursday, February 21, 2008 10:40 AM > > To: vanagon@GERRY.VANAGON.COM > > Subject: Gas tank out. How to remove debris from tank? (searched) > > > > Hi all. > > > > I'm prepping the gas tank for a top coat of some kind (bed liner maybe?) > > > > I can see some debris in the tank. I hesitate to flush it with water. > > > > Any tips on cleaning this debris out? I'll blow on the fuel outlet and > > return steel lines and maybe a shopvac and/or a rag on a stick, will > > get some of the debris out, but if there's a better way, I'm all > > "ears"! > > > > > > Thanks, > > > > Neil. > > > > -- > > Neil Nicholson. 1981 Air Cooled Westfalia - "Jaco" > > > > http://web.mac.com/tubaneil > > http://tubaneil.googlepages.com/ > > > > > -- > Neil Nicholson. 1981 Air Cooled Westfalia - "Jaco" > http://web.mac.com/tubaneil > http://tubaneil.googlepages.com/
Have something to add on this topic today? Revive this thread in the forum »