Oh I just had to google "COPD".

I see. Good warning.

Yah I use a mask when spraying stuff. Mostly. And I managed to set up
a spray booth of sorts. Something that at least creates an in/out air
flow. Sure helped when I was spraying my bumpers. Sure made me aware
of just how much crap can end up in the air...... and someones lungs
if not careful!

And of course I was kidding about killing weeds while flushing the gas tank!

Cheers,

Neil.

On Fri, Feb 22, 2008 at 6:10 AM, John C... <Trvlr2001@comcast.net> wrote:
> As Always, Folks;
>  When Atomizing Carb Cleaner
>  With Air Pressure....
>  (or anything else )
>  Wear a Mask With the Appropriate Fume Cartridge...
>  This of course applies to Paint (especially Epoxy )
>  and Sanding / Grinding dusts.
>  COPD is a real concern for later life.
>  not to mention the big "C"
>  Be Careful It's a Jungle Out There !!!
>  JC.... ;o)
>
>
>  -------------- Original message --------------
>  From: neil N <musomuso@GMAIL.COM>
>
>  > Thanks Scott. As always very informative.
>  >
>  > I almost got to the point of using "biodegradable" grease remover and
>  > flushing the remains out on my weed riddled lawn, but thought better
>  > of it --- ;^)
>  >