Gerry,

The latch can usually be adjusted. There's ample information on this
problem in the archives.

If you look closely at the latch (handle), you will find a small hole
going through to the latch. Find a small drift to and drive that roll pin
out. You can use a small nail or an old drill bit but you have to grind the
tip flat. If you don't do that, chances are a sharp tip of a nail could
cause the roll pin to expand and wedge in instead of popping out. After you
get the roll pin out, wiggle the latch into a position so it will close the
window tighter. Pop the pin back in and you should now have a much quieter
window w/o having to wedge too many pennies under the latch.

Cheers,

BenT

On 2/26/08, Royston, Jerry <gmr@obpa.usda.gov> wrote:
>
> I've got this annoying wind noise coming out of the driver' side vent
> window.  Will replacing the gasket/seal take care of this problem?  The
> window is not closing tight enough but I don't want to wedge anything
> behind the handle for fear of breaking something.  The gasket is $35 so
> I thought I'd check with the list first before ordering.
>
> Gerry
> '87 Westy
>

--
BenT

--
BenT