I just removed my rear heater, and i left the wiring
harness in tact and still connected to the switch on
the dashboard......im thinking later-on i can use the
wiring to power something back there.....i can use the
fan switch to turn it on/off,  im thinking maybe use
it to power some LED floor lighting like in the movie
Saturday Night Fever that is, if i dont install wood
floors.

Phil 84' Westy Tiico'ed in 2002

--- Mark Drillock <mdrillock@COX.NET> wrote:

> The wires come from a connector plugged into the
> back of the heater fan
> switch. There is also a brown ground wire running
> over to the main
> ground stars where it can be unplugged. The power
> wire from the fuse
> panel to the fan switch connector can be released
> from the connector
> shell with a jewelers flat blade screwdriver.
>
> Mark
>
> Jim Felder wrote:
> > I just now got to the point where I could lift the
> heater core of my 90
> > clear of its mounts... except for one thing: the
> wires that power and
> > control the heater motor.
> > Is there a connector I am not seeing? Do most
> people just cut them and
> > solder them back later?
> >
> > I read everything I could find on the list about
> removing the dash and
> > heater, and because of that information it was a
> very quick job, no problems
> > at all. Until these wires!
> >
> > Also, what is the tall silver electronic box that
> bracket to the crossmember
> > behind the blove box and just to the right of the
> heater plenum? It has a
> > bunch of wires going to it.
> >
> > Jim
> >
>

      ____________________________________________________________________________________
Looking for last minute shopping deals?
Find them fast with Yahoo! Search.  http://tools.search.yahoo.com/newsearch/category.php?category=shopping