The silver box,
Cruise control , control unit perhaps ?

( unless it's a an aux diesel heater control box, those are mounted there.)

yeah, the wires unplug from the back of the fan switch, except for that one
brown ground wire.

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Mark Drillock
Sent: Wednesday, March 05, 2008 2:05 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Question about front heater core removal... blower motor wires

The wires come from a connector plugged into the back of the heater fan
switch. There is also a brown ground wire running over to the main
ground stars where it can be unplugged. The power wire from the fuse
panel to the fan switch connector can be released from the connector
shell with a jewelers flat blade screwdriver.

Mark

Jim Felder wrote:
> I just now got to the point where I could lift the heater core of my 90
> clear of its mounts... except for one thing: the wires that power and
> control the heater motor.
> Is there a connector I am not seeing? Do most people just cut them and
> solder them back later?
>
> I read everything I could find on the list about removing the dash and
> heater, and because of that information it was a very quick job, no
problems
> at all. Until these wires!
>
> Also, what is the tall silver electronic box that bracket to the
crossmember
> behind the blove box and just to the right of the heater plenum? It has a
> bunch of wires going to it.
>
> Jim
>

--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.516 / Virus Database: 269.21.4/1313 - Release Date: 3/5/2008
9:50 AM