He easiest way in my book is just put your bleed hose on the slave ( I use
the clear hose in a bottle method, with the end of the hose below the level
of old brake fluid in the bottle - and the clear hose lets you watch for
bubbles )
But just hook up your rig and give it nice smooth strokes, like 10 or so,
unless it needs more.  Nice fresh brake fluid too of course.
Scott
www.turbovans.com

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Clint Kolda
Sent: Wednesday, March 05, 2008 5:46 PM
To: vanagon@GERRY.VANAGON.COM
Subject: clutch bleeding

What is the easiest way to bleed the clutch after replacing a slave
cylinder?  I have a manual brake bleeder which basically consists of a
length of tubing a check valve.  Will this work for the clutch or do I need
a vacuum bleeder?

  Clint
  '86 Weekender - Hopefully back on the road this weekend....

--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.516 / Virus Database: 269.21.4/1313 - Release Date: 3/5/2008
9:50 AM