OK, I've swapped out the AFM with another used one that I had. I cleaned it
up first. I cleaned out the TBH.  I replaced all the vacuum lines and
cleaned up all the connections I could.  I then ran the exhaust check. No
need to blow smoke into the ehaust via the vacuum cleaner method, I could
feel the air coming out of the joint.  I tried to replace both gaskets but
the gap is still there at the connection. See http://tinyurl.com/yw6pnx  and
you will see what I mean. I can't get that gap to close. What should I do?

Thanks,
Bryan