It is probably a loose or broken ground connection at one of the two
star ground connectors that are behind the fuse panel.  The other thing
I would try is unplugging the instrument cluster and plugging that back
in.  Be sure the plug is straight.  You should find the problem this way.

Ken Wilford
John 3:16
www.vanagain.com

Joe Federici wrote:
> OK, so here the problem I pulled the dash off to replace the heater
> motor. Put everything back to together and now my blinkers aren't
> working properly.
>
> What I'm getting is dim green led that's on constant, if the flip the
> stalk to use the blinker the green light get brighter not does not
> blink. Everything else seems to work fine. The hazards to work.
>
> I check the connections on the steering column and they all seem to
> be OK. I have cruise control on that same stalk and that works fine
> as well.
>
> Anyone have a good starting point for tracking this down. I looked of
> loose grounds or connections but I'm not seeing anything.
>
> thanks
>
> JFF
>
>
> '87 Syncro Adventurewagen: Vincent Van-Go
>
>