What an ugly turd!  How can anyone put white doors on a dark doka.

I'm willing to do you a big favor and take it off your hands for $56 and a
handfull of jelly beans.  When should I come over to pick it up?

Jeff

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com]On Behalf
Of BenT Syncro
Sent: Tuesday, March 11, 2008 3:03 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Opinion regarding new lowered 88 2wd Doublecab w/
Porsche/Pirelli 17's

Hi Gang,

At a weak moment I decided on putting my H&R (purple) lowering springs on my
88 Doka. I had them on my 87 GL with the stock Boge shocks were they
occasionally bottomed out. This time around I am using heavy duty Bilsteins,
thanks to a couple of generous listees (Dave Lockshaw & Joel VanderKwaak)
who sold me gently used units for very little money.

Anyway, the Bilstein gas shocks added an extra 1/2 inch of height compared
to the oil-filled Boges. The front end dropped 2 inches compared with this
combo. The ride is noticeably firmer. My initial reaction was to yank them
out. After consultation with my regular passengers, it became apparent I was
the only one who noticed the difference.

I'm not sure I like the look.

I posted pic which is available for viewing just for this week. They may be
viewed at:

http://images.craigslist.org/011501010212011604200803112c763e804b4fe23ba8001
87a.jpg

http://images.craigslist.org/01010501020701161320080311d404a424ae93a8945400f
871.jpg

Note that the rear which has not been lowered is about 2" higher. That's
what the front end used to look like. Now the 17 X 7" wheel with 40 series
Pirellis looks to fill wheel opening better. I have 17 X 9" wheels in back
with 45 series Pirellis.

So what do you guys think? Jack it back-up to stock or keep the lowered,
pimpy ride? If the consensus is to keep it low, I will drop the rear to
match.

For the curious, the wheels are Porsche Cup 2 Alloys as found on 911, 944,
928, and 968 cars. Offset was corrected with spacer/adapters to ET20. rears
will almost clear sliding doors. Spokes scrap a little but can be corrected
with door adjustments. The narrower fronts are just perfectly inline with
the wheel arches. Bolt pattern is typical Porsche at 5 X 130mm.
Spacer/adapters convert to 5 X 112mm. Pmail me if you need even more detail
than that.

Cheers,

BenT
www.vanagoncafe.com