Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Replacing Fuel Lines
From:Stephen Grisanti
Date:Sat, 8 Mar 2008 10:59:14 -0800

"My charcoal had all become compressed and wasn't
allowing the tank to  vent properly (thunk sound after
shutting off the engine as the tank depressurizes)."

This may have solved one of my Westy's mysteries.
Thanks!

Stephen

--- David Clarkson <Dvdclarksn@AOL.COM> wrote:

> Several vendors have kits available for this. I
> replaced my lines when the
> tank started to leak from the gaskets around the
> cross-over vent lines. I went
> with the fuel line from Bus Depot since it was
> reasonably priced and the same
>  kind that was original on my 90 Westy (Conte-I
> believe was the brand) I was
> pleasantly surprised when examining the old fuel
> lines that they had held up
> and  looked almost like new after almost 17 yrs. and
> 250K. That was reason
> enough for  me to want the OEM fuel line. Be careful
> removing the old hose and
> re-installing  the new hose on the plastic piece
> that goes through the firewall.
> Some have  opted to run the new line right through
> this hole without this
> piece using a  grommet to protect the line from
> abrasion. Be sure to replace all
> of your hose  clamps and use fuel line clamps so you
> don't cut into the new
> fuel line. I found  that you will need to re-tighten
> the clamps around the
> injectors and fuel rail a  couple of times after the
> first few times you run the
> engine. It's also a good  time to check over the
> fuel tank and all of the vent
> lines and gaskets. I  replaced everything here too.
> Also a good time to replace
> your fuel sending unit  if its old and original. Ben
> has some good pictures
> and explanations of this job  on his web site.
> Plenty of info on this subject
> if you search the archives too.  I also checked over
> everything at the same
> time with the evap canister and  valve. My charcoal
> had all become compressed and
> wasn't allowing the tank to  vent properly (thunk
> sound after shutting off
> the engine as the tank  depressurizes). I removed
> the canister and gave it a few
> gentle thumps until  everything in there moved
> around again and air passed
> through it. If this  doesn't work you probably need
> a new canister. Good luck
> and remember to be  careful with any incandescent
> shop lights (breaking) and
> cell phones (turn  off) with all the fumes and
> possibility of a spark.
>
> David Clarkson
> 90 Westy 248k
>
>
>
> **************It's Tax Time! Get tips, forms, and
> advice on AOL Money &
> Finance.
> (http://money.aol.com/tax?NCID=aolprf00030000000001)
>

      ____________________________________________________________________________________
Looking for last minute shopping deals?
Find them fast with Yahoo! Search.  http://tools.search.yahoo.com/newsearch/category.php?category=shopping