I not sure how this would happen but check the connecting at the
hazard. There is a single blue gray plug, and a larger plug. If the
single blue gray is discounted you will get the weirdness you are
describing. I forgot to connect this after installing my dash and the
blinkers did the exact same thing. It could be that the wire rubbed
the metal part of the dash? It's a tight fit.

JFF
On Mar 14, 2008, at 5:21 PM, Pensioner wrote:

Yesterday while bus-tling about to get ready for the tour de fleur
sauvage,
the turn signals went nips-up in a most strange way. With the stalk in
either left OR right, the console indicator goes to solid green, not
fast
blink like a burned out indicator light.  With the stalk in center
position
the indicator glows dimly.

Changing the emergency flasher relay (21) didn't correct the fault.

I have disconnected/isolated both rear light panels, no effect,
disconnected
the Emergency Flasher Switch, no effect, disconnected the stalk switch
connectors, no effect on the dim green when the EFR (21) is
inserted.  Of
course with the EFR out there is no indicator.  Bently 97.131
illustrates
that with the EFSwitch out of the circuit and the Turn signal switch
disconnected there should be no current path to turn on the indicator
when
the EFR is inserted.

Anyone have any ideas for further troubleshooting.  Copy by pmail
would also
be appreciated.

One day older and a little more confused.

pensioner