

| Subject: | Re: Turn signal system failure |
| From: | Matthew Snook |
| Date: | Fri, 14 Mar 2008 14:46:12 -0700 |
This might be a good time for me to get my own two bits in. Recently, my '84 started doing nearly the same thing! After sitting for three days, I took off for a gig, and the flasher didn't flash. Left or right with the lever yielded just a steady green light. Later they started to work. Now it seems to be hit or miss: I either get signal lights flashing or just a steady green indicator. Is my problem the same as Pensioner's? I don't get the dim LED in the center position, but I am getting the same non-flashing result. Matt -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM] On Behalf Of Pensioner Sent: Friday, March 14, 2008 2:22 PM To: vanagon@GERRY.VANAGON.COM Subject: Turn signal system failure Yesterday while bus-tling about to get ready for the tour de fleur sauvage, the turn signals went nips-up in a most strange way. With the stalk in either left OR right, the console indicator goes to solid green, not fast blink like a burned out indicator light. With the stalk in center position the indicator glows dimly. Changing the emergency flasher relay (21) didn't correct the fault. I have disconnected/isolated both rear light panels, no effect, disconnected the Emergency Flasher Switch, no effect, disconnected the stalk switch connectors, no effect on the dim green when the EFR (21) is inserted. Of course with the EFR out there is no indicator. Bently 97.131 illustrates that with the EFSwitch out of the circuit and the Turn signal switch disconnected there should be no current path to turn on the indicator when the EFR is inserted. Anyone have any ideas for further troubleshooting. Copy by pmail would also be appreciated. One day older and a little more confused. pensioner
Have something to add on this topic today? Revive this thread in the forum »