after pulling down our so called "rebuilt" 2.0 air cooled I inherited. I
noticed the cam is bad as I suspected.
1. is there a "better" cam or cam grind I should use on this ex Californian
injected 82 Westy?  this engine only had about 4-500 miles since the
supposed rebuild by a shop in Colorado springs many years ago. the cam has
uneven surfaces on the larger lobes and I cannot believe that someone would
install this.also we noticed that the main bearings had uneven wear on one
side. sheesh!
2. it has Mahle of Brazil Pistons and cylinders. how were the quality of
these?
thanks, Thomas

--
1985 Full Westy "Rustfalia"
1982 Full Westy "dead engine on the mend"
1991 GL "smokers cough"
1972 Honda Z600 2 cyl