On 4/5/08, Woody Halsey <WHalsey@sya.org> wrote:
>
> Dear All,
>
>
>
> As I proceed with my sound insulation project, I realize that I have
> forgotten (if I ever knew) how to remove the interior panels from the
> front doors and the slider. Can someone give me a reminder  (or point me
> to a link) on how to get at the screws that hold the interior door
> handles in place? I have easily removed all the grab bars, elbow rests
> etc already. And popped off (and repaired) all the rear panels.

Woody,

You can pry the screw covers from the edge closest to the center of the grab
handle.
There are two Phillips head screws on each end. The door latch handle has a
plastic
finger guard which can be pried outward to reveal a single machine screw
that holds
the metal surround. Once that is out with the grab handles and window
cranks, the
door panels can be just popped off. There are plastic snaps all around the
perimeter.
I use a plastic spatula to get the first one out. The rest I pop out with
a flat edge screw-
driver or putty knife as close to the snap as possible. Don't forget to
remove the vent
on the rear edge of the door.

If you have power mirrors and windows, you do not need to remove the
switches from
the door panels. Same goes for the door speaker and map pocket. Just pull
the harness
off the switches. Map pocket just stays on on the panel just like the
speakers.

BenT