There is a connection on the rear of the hazard switch that can cause
this problem.  Do your hazard lights work?

Ken Wilford
John 3:16
www.vanagain.com

Matthew Snook wrote:
> Of course that's the _first_ thing I did! - top off the blinker fluid.
> After that I checked the lights.  All corners working, but use of the signal
> lever just gives a continuous light both outside and on the LED on the dash.
> No blinking anywhere.  When all is quiet, I can hear the unit click when I
> first move the lever, then another click just after it's returned to center
> and the LED goes out.  I just figured it to be the relay or whatever.  Are
> there other parts that can malfunction to cause the same result?
>
> It really bugs me 'cause it bugs me when others don't let _me_ know what's
> going on by using their blinkers.  I don't want to be one of _those_
> folks...
>
> Thanks,
> Matt
> :)
>
> ________________________________________
> From: JordanVw@aol.com [mailto:JordanVw@aol.com]
> Subject: Re: parts source?
>
> check your blinker fluid, it may be low.
>
> seriously, you need to be alittle more specific...is a bulb burned out?
>
>