

| Subject: | Re: parts source? |
| From: | Jake de Villiers |
| Date: | Mon, 7 Apr 2008 11:25:42 -0700 |
Just replace the flasher Matthew. They should be available at your FLAPS. On Mon, Apr 7, 2008 at 11:02 AM, Matthew Snook <matt@snooksband.com> wrote: > OK, now I've checked the emergency flashers, and they don't flash either. > Same result, just continuous lights and LED on the dash. > > I looked in my Bentley to see why Neil was making fun of me (other than > the > obvious), and I find only the emergency flasher listed. Is there only one > for both the signals and emergency flashers? Also, it seems to be a relay > plugged into a board. How would I do the push/pull on the wires as you > suggest? Looks like I'm just getting into this... > > Matt > > > -----Original Message----- > From: Mike Collum [mailto:collum@verizon.net] > Sent: Monday, April 07, 2008 5:33 AM > To: Matthew Snook > Cc: vanagon@GERRY.VANAGON.COM > Subject: Re: parts source? > > Matthew Snook wrote: > > use of the signal lever just gives a continuous light both outside and > on > the LED on the dash. > > No blinking anywhere. > > > I had a similar problem with my '85 a year ago. It turned out that > unplugging the wires from the relay socket, and pushing the connectors > back on, was the cure. Obviously a little corrosion there though none > could be seen. Reseating the relay itself made no change. > > Mike > -- Jake 1984 Vanagon GL 1986 Westy Weekender "Dixie" Crescent Beach, BC www.crescentbeachguitar.com http://subyjake.googlepages.com/mydixiedarlin%27
Have something to add on this topic today? Revive this thread in the forum »