I doubt there are separate fuses.
Whatever year vanagon you have is not apparent right now.
If it's up to 85, the fuses are awfully easy to check. Often they get
corrosion and don't conduct on the ends.

And the way you talk about 'checking very fuse' like it was a big task,
..........If you have an 86 or later with what I call 'tooth style'
fuses........
If you do, perhaps you think you have to remove each fuse to examine the
little strip that blows out visually.
You do not.
'the good fuses' of that type have little metal test points on them. You
just energize the circuit, and test for 12V with test light on both sides of
the fuses.
It's not that hard to think about wiring, look at diagrams, test for
voltages here and there, etc. 
It also helps to have things like another known-good 4 way flasher switch to
try.  
  

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Matthew Snook
Sent: Monday, April 07, 2008 5:11 PM
To: vanagon@GERRY.VANAGON.COM
Subject: blinkered

OK, so I finally replaced the relay with a new model, and now have turn
signals again.  All turn signal lights function as appropriate.  But when
the emergency flasher switch is thrown, only the lights on the right begin
blinking.  The left is dead.  Are the left and right sides on separate
fuses?  I'm hoping it's something simple like that.  Just looking for ideas
before I inspect each and every fuse. :)

Matt�

-- 
No virus found in this incoming message.
Checked by AVG. 
Version: 7.5.519 / Virus Database: 269.22.8/1363 - Release Date: 4/7/2008
8:56 AM