On Wed, Apr 16, 2008 at 2:28 PM, Scott Daniel - Shazam
<scottdaniel@turbovans.com> wrote:
>
>
>  If you are talking about a Remote Starter switch for initial cranking and
>  firing up - *imperative* to do it that way in my world, so you can be right
>  by the engine while it's cranking.

Yah I got myself a honking brass push button switch to install in
engine bay for remote starting.

>
>  Doesn't matter too much if fp runs during cranking or not.
>  Often you can't hear the fp running in that phase due to starter noise.
>  As long as there is fuel pressure....and all the other stuff at the right
>  time, it should fire and run.
>
>  Fire that mutha up !

I'm "on it" !

:^)

Neil.

Neil wrote:

>  I'll also be making up a push button (temp "on") for starter, so that
>  will help a lot with trouble shooting.
>

>