

| Subject: | Re: Arm rest pivot repair |
| From: | Michael Sullivan |
| Date: | Wed, 16 Apr 2008 10:26:23 -0500 |
Wow...more than I could ask for. Will take a look at it ASAP. Was looking at ETKA and couldn't see the exact setup. Thx again, Michael. On Wed, Apr 16, 2008 at 7:16 AM, Bob Stevens <mtbiker62@hotmail.com> wrote: > This is one description that gets passed around: > > > '87 -'91 adjustable armrests: > > the '87 up capt. chair armrests are put on with a roll pin. > > use your fingers and compress foam on the armrest between armrest and > > seatback, so you can see the pin. you might need a small flashlight > > you can hold > > in your mouth while you do this. you will need a centerpunch just under > > the > > diameter of the roll pin, or a large framing nail just under the > diameter > > of the > > pin with the tip flattened to use as a centerpunch. > > the pin will be sticking out more on one side of the shaft. use your > > centepunch and tap the roll pin out on the side opposite to the side its > > sticking > > out the most. > > ****NOTE: you must put a credit card or putty knife between the set pin > > and > > vinyl armrest to guide it out so it doesnt get hung up on the vinyl, or > > the > > pin will gouge/tear the armrest vinyl when you are punching it out. > > > > once roll pin is out, slide the armrest off the shaft. tighten or > replace > > the > > little allen bolts that hold the shaft to the seatback. Use blue loctite > on each allen bolt to ensure they stay put. > apply drop of oil to > shaft, then lightly tap roll pin in place in the > > armrest > > socket, and line it up with the corresponding hole in the armrest shaft. > > this > > is a pain in the ass. so have patience. i usually put another framing > > nail > > of the same diameter in the bottom hole opposite of the hole your'e > > tapping > > the roll pin into, to line them up. > > once you got the pin started in the whole, do not tap it in all the > > way, > > only as much as it was originally tapped in. > > > > > > > > > This weekend I realized that the passenger side right hand arm rest is > > loose. Just hangs down. Seems a screw(I found it) fell out of the pivot > > mechanism. Does anyone have a pic of how it is supposed to be? Would > like to > > fix ASAP. Thanks for the info. > > > > -- > > Michael in San Antonio > > 91GL AT 'Gringo' > > > ------------------------------ > Going green? See the top 12 foods to eat organic.<http://green.msn.com/galleries/photos/photos.aspx?gid=164&ocid=T003MSN51N1653A> > -- Michael in San Antonio 91GL AT 'Gringo'
Have something to add on this topic today? Revive this thread in the forum »