My method uses a .250" male spade on the end of the wire. This spade
plugs into the lower slot of the removed fuse #3. No way to put the fuse
back with the wire plugged into place.  If you remove the wire and put
the fuse in all you have done is move the interior lights,etc back to
the main battery. That is one of the advantages of my method. It can
easily be undone so the radio, inside lights, etc can be used even if
the aux battery has croaked.

Mark

Paul Guzyk wrote:
>> Mark's idea is simple and makes a lot of sense.
>
> I would add a label in the fusebox explaining what is going on.   You
> don't want someone else inserting the fuse and messing up your
> separator.
>
> (In case you ever loan your van to someone or someone other than you
> works on it).
>
>
>
>
>> that is the beauty of this list.
>> you can come up with a relatively simple approach, finally get it
>> running,
>> and the someone tells you another way to do it that would have saved you
>> another couple hours.
>> excellent idea mark! will
>