

| Subject: | Re: 12v Fan for fridge interior |
| From: | Keith Ovregaard |
| Date: | Thu, 15 May 2008 08:44:26 -0700 |
The air flow in back of the fridge starts at the grill at the bottom front of the fridge. From there, the cool air goes underneath and then rises up the back when it gets heated. Then the hot air escapes thru the vents behind the stove. The side vent also exhausts hot air. Works like a chimney (convection). So, to aim the fan down would work against the convection current. I suggest aiming the fan up. As far as putting a fan in the city water port, that will help exhaust some of the hot air, but for me, it was not worth it due to dust and water intrusion. The flap outside does not seal completely, so if you choose to put a fan there, you may want to redesign the flap, too. My 2 cents... Keith O On Thu, May 15, 2008 at 2:45 AM, Frank Condelli <RAlanen@aol.com> wrote: > In a message dated 14/05/2008 9:48:31 A.M. Central Standard Time, > LISTSERV@GERRY.VANAGON.COM writes: > > I had fun doing that: > _http://www.benplace.com/fan_fridge.htm_ > (http://www.benplace.com/fan_fridge.htm) > > > > > > Ben et all, I have a couple of comments on your fridge fan install. The > switch, I like using a lighted push button switch. The toggle switch > protrudes > out where it can be broken off. The light in the switch will let you know > wether or not the fan is running. AND, I like placing the fan on the top > of the > cooler fins so that the air is pushed downwards. > > Cheers, > > Frank Condelli > Almonte, Ontario, Canada > '87 Westy & Lionel Trains (_Collection for sale_ > (http://members.aol.com/Fkc43/trainsal.htm) ) > _Frank Condelli & Associates_ (http://members.aol.com/Fkc43/busindex.html > ) > - Vanagon/Vanagon Westfalia Service in the Ottawa Valley > _Vanagon Stainless Steel Exhaust Systems_ > (http://members.aol.com/Fkc43/exhaust.htm) > _BusFusion_ (http://members.aol.com/BusFusion/bfhome.htm) a VW Camper > camping event, Almonte, ON, June12 ~ 15, 2008 >
Have something to add on this topic today? Revive this thread in the forum »