OK, cool.
Buy it online or what ? 
Never seen any. 

Well you can't use plastic wire ties on exhaust parts.

But you could use heavy duty wire - but how mousey.
At least on top bracket bolted on right, 
And it looks good, works good.
Scott 

-----Original Message-----
From: Walt Spak [mailto:b20swalt@city-net.com] 
Sent: Sunday, May 18, 2008 4:48 PM
To: Scott Daniel - Shazam
Cc: vanagon@GERRY.VANAGON.COM
Subject: Re: exhaust bolts / studs... tips or tricks?

Scott,

You really ought to try Kroil!!!

I maintain that the best thing to do with the replacement tin is to not 
attach it at the exhaust.  Bolt it to the crankcase and wire tie the 
exhaust end to something above.

Walt

Scott Daniel - Shazam wrote:

>Well it depends if you are dealing with a nut on a stud ( very easy to deal
>with relatively speaking ) 
>Or a bolt threaded into the head.
>
>They go in a long way too, like 1.5 inches, even more.
>Stock, the start out with studs and nuts on one end of the head, bolts on
>the other.
>First, the BEST penetrating oil, bar none is called PB Blaster.
>Penetrating catalyst,
>Nothing else even comes close.
>It is twice as good as Gunk's liquid wrench say.
>
>  
>

-- 
No virus found in this incoming message.
Checked by AVG. 
Version: 7.5.524 / Virus Database: 269.23.20/1453 - Release Date: 5/18/2008
9:31 AM