pickle vanagon wrote:
> I'm planning on running a wire from my oxygen sensor up to the front of the
> van for a air/fuel mixture gauge (i.e., voltmeter).

Only part of that O2 sensor wire is shielded.  The black wire from the
sensor itself, up to the spade connector, isn't shielded.  The green
wire, from the spade connector to the ECU, is shielded.  I've known
others who have run an unshielded wire, from that spade connector,
forward to a meter without problems.  In fact, I'm getting ready to run
an unshielded wire forward to connect to my "Ken Lewis" LED O2 monitor.

Mike