Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
VanagonEuroVan
Subject:FS: Kennedy Adapter & TDI Swap (Ontario, Canada)
From:Jason Ewing
Date:Fri, 16 May 2008 12:23:57 -0400

Hey guys,

I was going to do a TDI swap into my 84 Vanagon, but haven't had time yet to
do it.  Since I'm now buying a new house this summer, I really don't have
time or money for the project.  So here's what for sale:

2001 1.9 TDI Engine swap (about 120k kms) with 11mm pump (from an automatic)
Kennedy Engineering Adapter plate w/flywheel
new Sachs clutch kit
used starter from a 5 speed TDI (will require an adapter plate)

I'm looking to get what I paid for everything.  $2800 Canadian $

The turbo actuator is siezed and will need to be replaced.  The a/c bracket
on the engine is damaged, but I didn't care since my van has no a/c or p/s
and I was going to run a short belt.  I have the complete wiring harness
w/ECU.  It will require the immobilizer to be removed (many chip suppliers
can do this for you) since I wasn't planning to use the TDI cluster, key,
etc.

Not interested in shipping, pickup only.  Guelph, Ontario (Canada).

Jason

Have something to add on this topic today? Revive this thread in the forum »