First some  questions.

1) Do you have a copy of the Bentley book - "Volkswagen Vanagon Official 
Factory Repair Manual"? If not, order one today from one of our list 
vendors. Not cheap but a "must have" for Vanagon Owners.
2) Do you have a copy of the ETKA - the official VW parts CD - ask some 
of our list members for where to get a copy. Request that they reply off 
list
3) Do you have a copy of the Haynes Vanagon Repair Manual.- This manual 
is a Europe - only book, but Ron Salmon at Bus Depot carries it as a 
regular stock item.

If you don't have all three, the Vanagon cannot be maintained properly, 
nor can proper trouble-shooting be done when there is a problem.

The Temp II sensor is mounted in the thermostat housing which is located 
to the forward left side of the engine, just about directly under the 
firewall. The sensor is blue.

When replacing it, be quick, and you won't lose enough coolant to worry 
about.

John Rodgers.
88 GL Driver

Jamie Fitterer wrote:
> Where is the Temp II sensor located?  "Prohibition will work great injury to the cause of temperance. It is a species of intemperance within itself, for it goes beyond the bounds of reason in that it attempts to control a man's appetite by legislation, and makes a crime out of things that are not crimes. A Prohibition law strikes a blow at the very principles upon which our government was founded." > Date: Thu, 22 May 2008 08:19:37 -0500> From: inua@CHARTER.NET> Subject: Re: Runs like crap when cold> To: vanagon@GERRY.VANAGON.COM> > Sounds like a Temp II sensor problem. What you describe is pretty typical.> > Good hunting,> > John Rodgers> 88 GL Driver> > Chris Snyder wrote:> > My 1987 runs really crappy when I first start out for the day. It doesn't> > have much power, may back fire a little and I have to keep "Padding" the gas> > pedal. Once the temp gauge moves into the normal range, it runs fine. It has> > power, no stumbling. Runs great.> >> > The plugs are new and so are the plug wires. I have adjusted the fuel mix at> > the AFM when it was warmed up and I am out of ideas. Does anyone here have> > some ideas?> >> > Thanks in advance for your help.> >> > Chris S.. </HTML>> >> >> >
>
>