

| Subject: | Rubber Mats: Do it yourself (NGW) |
| From: | Don Hanson |
| Date: | Thu, 29 May 2008 07:02:04 -0700 |
No Gasoline Whining
Hi all,
I made some mats for the front of my Vanagon from some horse barn flooring
material that my S.O. had left over from a barn we built. I am going to do
the same for the rear. This reclaimed hard rubber mat comes in various
thickness, is made from old ground up tires and it's used in horse barns to
give the horses traction. The stuff I used is about 5/16" thick and smooth
on one side with a little texture on the other. It comes in 44" x ~6'
sheets. I cut mine using a band saw, but a carpet/utility knife works too,
and probably a saber saw.
Very tough stuff (horses walk on it without leaving a mark in our barn
where it is laid right over the dirt) It will probably be a good sound
deadener also and I know it keeps stuff from sliding around in the van. It
IS heavy...
You can probably Google a source using Barn supplies, or maybe Horse Mat
or Barn mat. I can ask my Marie where she got ours (when she wakes up) if
anyone needs.
I also have some pieces of that mat that I find useful on my
workbenches..I toss a square on the bench when I do messy work or something
that needs traction. I used a piece to cushion my old 944 T motor sitting
on the concrete floor and I sometimes put it down to stand on if I am on my
feet all day on concrete...Good stuff and very reasonable cost..
Don HansonHave something to add on this topic today? Revive this thread in the forum »