

| Subject: | Re: problems...fridge on 12 v |
| From: | Neil2 |
| Date: | Fri, 6 Jun 2008 09:40:40 -0700 |
FWIW, I've the older type [fuse inside the driver seat pedastal (Scott :-)] and I'll be troubleshooting mine this weekend, hopefully and we can compare notes on what we find. Last week I took a trip in mine and the 12v operation seemd to be either OOC or woefully inadequate. Propane and 110 vac pert near froze everything. On 6/6/08, neil N <musomuso@gmail.com> wrote: > > You don't mention the year of your Vanagon, (don't forget to mention > the year! --- :^), or more importantly the model of fridge, but even > though there is power at the fuse, it may not be getting to the 12V > heater element. > > Check the wiring from fuse to fridge plug. If there is power to plug, > likely the fridge relay is ok as it is PRE fuse. But, on the earlier > models, (80-81 IIRC) the fridge relay is located on the fridge itself > and is POST fuse. So fuse could be fine, but relay could be at fault. > On later models this relay is under the drivers seat in aux battery > area. (yes you need to remove the drivers seat --- :^) > > One other thing to remember is that the PO could have done any number > of things to wire up an aux battery (if present) or other wiring > mayhem that could cause problems. Check associated wiring before > pulling the fridge. > > Basically if there is 12V getting to the plug that connects to the > fridge, you *likely* have to pull the fridge to check the > wiring/switch etc. on it. > > Hope that helps. > > Cheers, > > Neil. > > -- > Neil Nicholson '81 JettaWesty "Jaco > > http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines > http://web.mac.com/tubaneil > http://tubaneil.googlepages.com/ > > On Fri, Jun 6, 2008 at 6:45 AM, barriver witch > <barriverwitch@hotmail.com> wrote: > > Hi > > Can anyone help me out here... I have power to the fridge... inline fuse > working...but fridge won't cool.... works on propane and plugging in....???? > -- Neil '82 Diesel Westy Peace of
Have something to add on this topic today? Revive this thread in the forum »