But if you tighten the screw on the underside of the mirror it puts more
tension on the spring and it won't flop around as much.

David
Marshall

http://www.hasenwerk.ca
Box 4153, Quesnel BC,
Canada V2J 3J2

Engine Conversion FAQ -
http://www.hasenwerk.ca/faq

On Tue, June 10, 2008 09:26, Keith
Ovregaard wrote:
> The mirrors on my 84 did that, so I took em
apart and clean em up.
> Still flopped, so I ground off a flat
spot on the outer elbow and
> drilled a hole for a SS bolt long
enough to go thru the whole thing.
> Never had a problem after
that.
>
> Keith O
>