Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
VanagonEuroVan
Subject:Re: 14" VW Alloys
From:BenT Syncro
Date:Sat, 21 Jun 2008 00:05:15 -0700

On Fri, Jun 20, 2008 at 1:32 PM, Jeff Lincoln <magikvw@gmail.com> wrote:

> Ok, this might seem a dumb question but I have to know.
>
> I won a pair of VW alloys at the Buses by the Beach Benefit back in May.
> I'd
> like to put them on but I'm comfused about the lugs/studs.
>
> It appears that the alloys require lugs with a cone like shape where the
> lugs meets the wheel and most of the ones I received with it are rounder.
> So
> I guess my question with this is does it really matter? Can I use the
> rounder shapeed lugs.
>
> My next question is that some of the hardware are just lug nuts and others
> are lugs with a threaded stud on them. What's with that? Do I need both for
> some reason?
>
> Again I know this may seem a dumb question but it is Friday :)

Jeff,

The 60� conical seat lugnuts and lugbolts are specified by VW so that they
can offer alloy
wheels w/o having to install longer studs. Keep in mind that factory alloy
wheels have a
thicker mounting pad than your stock steel wheels. If you use your stock
ballseat hardware,
you might find that only 2-3 threads are engaged to hold your wheels on.
IIRC, VW specifies
7.5 turns of threads engaged. Besides that, think about the ballseat lugnuts
like a baseball
on a table. Only the very edge is touching. Although that might be a huge
problem on a steel
wheel, I would be very uncomfortable about having only the edge of that hard
steel ball held
against the much softer seat of the alloy wheels.

You can get the 60� seat 14mm 1.5 lugnuts at your FLAPS. I have some SA
factory lugbolts
if you are interested. Better yet, just get some used hardware from someone
with stock alloys.

I have some of these tall lugnuts too:

http://hometown.aol.com/realsf/images/allnutsside.jpg
http://hometown.aol.com/realsf/images/allnutstop.jpg

Where's what ballseat lugnuts look like:

http://hometown.aol.com/realsf/images/cadnuts1.jpg

Compare the conical seat bolts to your shorty steel lugnuts:

http://hometown.aol.com/realsf/images/lugbolt1.jpg

BenT

ps: syncros use lugnuts in front as well.

Have something to add on this topic today? Revive this thread in the forum »