that's exactly the wire it was.    I actually have no idea what this wire
is... I wish I had looked at it with the fridge out.  According to the
diagram in my fridge manual, there should only be 3 DC wires, but together
with the 3 in the connector this makes 4 of them.

My statement on the ground was not based on any actual knowledge!

-Wes

On Mon, Jun 23, 2008 at 6:55 PM, Neil2 <vidublu@gmail.com> wrote:

> Did the wire you connected have a long, soft (comparably), clear shell
> about 1/4" by 1/4" by 1.5" give or take?
>
> If so, did it connect to a mating connect just the same but opposite
> gender?
>
> My fridge 12v ops is OOC and haven't had time to troubleshoot it but
> wondered when you brought up the ground.
>
>
>
> On Mon, Jun 23, 2008 at 2:04 PM, pickle vanagon <greenvanagon@gmail.com>
> wrote:
>
>> Never mind!
>> found it.  It's another wire from the fridge (ground for 12v operation
>> maybe?).  I was able to reach it from the sink cabinet without taking
>> anything out (thank goodness).
>>
>> -Wes
>>
>>
>> On Mon, Jun 23, 2008 at 4:44 PM, pickle vanagon <greenvanagon@gmail.com>
>> wrote:
>>
>> > So,
>> > I just finished getting my fridge back in its hole after doing fridge
>> and
>> > seam rust maintenance.  And now (after getting it all back in!) I have
>> an
>> > "extra" wire.  Out of the same "hose" that carries the 3 wires that
>> become a
>> > single connector to go to the fridge, there is another single black wire
>> > with a female spade connector that is not part of this connector.  Where
>> > does this wire go??  I vaguely remember disconnecting it, but can't
>> figure
>> > out what it could go to.  Hopefully I won't have to pull the fridge back
>> > out...
>> >
>> > Thanks very much for any help!
>> > -Wes
>> >
>> > This is an '83 1.9l westy
>> >
>>
>
>
>
> --
> Neil2
> '82 Diesel Westy (Duckie)