Did the wire you connected have a long, soft (comparably), clear shell about
1/4" by 1/4" by 1.5" give or take?

If so, did it connect to a mating connect just the same but opposite gender?

My fridge 12v ops is OOC and haven't had time to troubleshoot it but
wondered when you brought up the ground.

On Mon, Jun 23, 2008 at 2:04 PM, pickle vanagon <greenvanagon@gmail.com>
wrote:

> Never mind!
> found it.  It's another wire from the fridge (ground for 12v operation
> maybe?).  I was able to reach it from the sink cabinet without taking
> anything out (thank goodness).
>
> -Wes
>
>
> On Mon, Jun 23, 2008 at 4:44 PM, pickle vanagon <greenvanagon@gmail.com>
> wrote:
>
> > So,
> > I just finished getting my fridge back in its hole after doing fridge and
> > seam rust maintenance.  And now (after getting it all back in!) I have an
> > "extra" wire.  Out of the same "hose" that carries the 3 wires that
> become a
> > single connector to go to the fridge, there is another single black wire
> > with a female spade connector that is not part of this connector.  Where
> > does this wire go??  I vaguely remember disconnecting it, but can't
> figure
> > out what it could go to.  Hopefully I won't have to pull the fridge back
> > out...
> >
> > Thanks very much for any help!
> > -Wes
> >
> > This is an '83 1.9l westy
> >
>

--
Neil2
'82 Diesel Westy (Duckie)