In a message dated 26/06/2008 11:28:00 A.M. Central Standard Time,
LISTSERV@GERRY.VANAGON.COM writes:

I want  to metal basket for the rear of my westie.  I want to use
3/4" square  tubing but would like to use round corners as opposed to
making 45 degree  cuts and having square corners.

Has anyone had
and success with  bending square tubing without it kinking?  If so,
what method did you  use?

Funny subject as I was just  at LEV-FAB Engineering yesterday in Terrebonne,
QC and saw their square tubing  benders.  These are the folks who are now
making all the Stainless  Steel exhaust parts for me.  If you want to contact them
Pmail me and I'll  get you in contact with them.

Cheers,

Frank  Condelli
Almonte, Ontario, Canada
'87 Westy & Lionel Trains (_Collection for sale_
(http://members.aol.com/Fkc43/trainsal.htm) )
_Frank Condelli &  Associates_ (http://members.aol.com/Fkc43/busindex.html)
- Vanagon/Vanagon Westfalia Service in the Ottawa Valley
_Vanagon Stainless Steel Exhaust  Systems_
(http://members.aol.com/Fkc43/exhaust.htm)
_BusFusion_ (http://members.aol.com/BusFusion/bfhome.htm)  a VW Camper
camping event, Almonte, ON, June 12 ~ 15,  2008