Thanks, i will try to trace the oil pressure switch out tomorrow.

----- Original Message -----
From: "Dennis Haynes" <d23haynes57@HOTMAIL.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Monday, July 07, 2008 10:28 AM
Subject: Re: Tracking down a spare wire..

> My memory is foggy and I am at work so I can't look this up. Is the oil
> pressure warning light working?
>
> Dennis
>
>
>>From: Darrel Sifers <DarrelSifers@COMCAST.NET>
>>Reply-To: Darrel Sifers <DarrelSifers@COMCAST.NET>
>>To: vanagon@GERRY.VANAGON.COM
>>Subject: Tracking down a spare wire..
>>Date: Mon, 7 Jul 2008 10:01:30 -0700
>>
>>Just completed changing out the exhaust system (all pipes, converter,
>>muffler and o2 sensor) on my 84 camper and i found an "extra" wire
>>hanging.
>>  I do not think i disconnected this wire but not sure and i can not seem
>>to find where it might go.  The wire is a green with black stripe but
>>someone has extended it with about two feet of red.  This is in the same
>>bundle with the wires to the sensors in the coolant tank.  I tested this
>>green/black and it is an ignition switched 12 v.  This camper is new to me
>>and i am finding my way through it.  any ideas where this could go to?  I
>>do have the Bently manual but could not seem to find it in there.
>>
>>Thanks,
>>
>>Darrel