

| Subject: | Re: Sitting in traffic question |
| From: | Chris S |
| Date: | Wed, 9 Jul 2008 22:27:02 -0400 |
Would wrapping your exhaust header with fiberglass exhaust wrap help lower the heat? Chris S. On Tue, Jul 8, 2008 at 10:14 PM, Cullen Stewart <cullberly@vermontel.net> wrote: > You are not rambling. Three years ago I had severe ignition failure from > sitting in traffic at Bonaroo with my '85. The residual heat seams to bleed > off rapidly in my experience and the temp only spikes while running and > diminishes shortly after turning the ignition off. My cure was fairly > extreme, I opened the hatch and removed the lid. This got me to the show > and > the Tennessee natives did not laugh too loud. > > ----- Original Message ----- > From: "Bill Shawley" <easywind1975@HOTMAIL.COM> > To: <vanagon@GERRY.VANAGON.COM> > Sent: Tuesday, July 08, 2008 8:53 PM > Subject: Sitting in traffic question > > > Suppose you are faced with sitting in a long line of traffic where the > column of vehicles maybe moves every few minutes or so. From a cooling > standpoint is it better to turn the vehicle off in between or does the > residual heat need the engine running to cool things off. Here's the > context. > > 2 years ago I overheated driving into a music festival, found out later > that > the big rad fan resistor was bad (86 w/ AC) > > 1 year ago same festival, very nervous but no overheating or warning light, > I did see the temp gauge rise above normal and I would rev the idle > occasionally. > > This year things seem cool mechanically but the memory of overheating and > being heckled by a WV local still stings, plus there'll be a rugrat in tow. > > So should I > 1) cut the van off after moving a few feet (and save some gas/polar bears) > 2) cut the van off afer moving a few feet and waiting a minute or so > 3) leave the van run and raise the idle a little to get that h20 pump > humming > 4) cool out and crack a cold one while waiting for traffic to move > > Oh yeah I noticed that the fan didn't come on when I turned the AC on the > other day (I don't use it much), I plan to check the ballast resistor and > if > that's ok get the van up to temp and let it idle for awhile to see if I can > get both fan speeds to kick in. > > I'm I rambling and being too paranoid? > > Ryan > > _________________________________________________________________ > Making the world a better place one message at a time. > http://www.imtalkathon.com/?source=EML_WLH_Talkathon_BetterPlace= >
Have something to add on this topic today? Revive this thread in the forum »