

| Subject: | Re: Playing "Mechanic Ping-Pong" with my Westy! |
| From: | Chris S |
| Date: | Tue, 8 Jul 2008 21:07:23 -0400 |
Get a set of tools and let the list help you. It sounds more reasonable than your mechanic. ;-) Chris S. On Tue, Jul 8, 2008 at 8:51 PM, PB <pbrattan@gmail.com> wrote: > I posted a while ago that I took my Westy to a local German car mechanic > because of oil and transmission fluid leaks. He pressure tested the > radiator and said it needed to be replaced, so I let him do it. Well, the > leaks are fixed, but the engine temperature light keeps going on within > 5-15 > minutes after I start driving. When I stop and check the fluids, both > reservoirs are properly filled. The mechanic replaced the sensor, but the > light continued to go on. I've had the van back to the mechanic around 5 > times, and it's still not fixed! I just dropped it off again today, and > the > light was flashing when I pulled into the garage. The mechanic said to > shut > off the engine, so I did. He then got in, turned it back on, took it for a > test ride, and the light didn't go on at all! I chose this mechanic > because I drive past his garage every day on the way to work, and he has > been there for at least 25 years. > > I called another mechanic, the renowned "Bela" of Burbank, CA. He told me > to ask the mechanic to check the hose temperature, and set the thermostat > to > open at a lower temperature. The mechanic says that the replacement sensor > he installed was not the original one, and the original one was not > available. He also said that the wires were corroded, and the wires are > also unavailable! This has been going on since April! I'm afraid to drive > the van, even if the coolant appears to be full. I live in North Hollywood > (Los Angeles.) Does anyone have any suggestions? I sure would like to be > able to go to Santa Barbara in the Westy this weekend...(the French > Festival! I went there LAST year in the Westy without any problem.) > > Thanks. > Patti >
Have something to add on this topic today? Revive this thread in the forum »