Right.

Had planned to either just cover the lower junction box with a plate
or do something else with it, like add an additional double power
receptacle. At this point I'll probably live with the stump of the
button, since the circuit breaker still works, or replace the breaker
with the GoWesty circuit breaker just to make it nice.

Unless my hardware store guy comes up with some other interesting
solution.

In any case, I'll let you know.

Thanks everyone, for all the help and suggestions!

Thomas

On Jul 14, 2008, at 4:44 PM, Todd Last wrote:

> I had previously added a GFCI outlet to my Westy with the circuit
> breaker. I may be wrong, but I thought when I looked at the breaker
> it seemed to be a pretty standard part that you could get at a
> better hardware or electronics store. If you remove the breaker,
> then you have a hole to deal with.. Although it might be cool to
> have a breaker and a small 120V voltage gauge in the lower panel.
>
> regards,
> Todd
> '88 Westy