I had removed my piezo and bent it while cleaning, and also replaced
the thick gasket with a thinner layer of RTV.  So it wasn't lining up
right.

I have bent it down and out so that it looks more like the picture.
On mine, the tip approaches the metal between the 1st and 2nd gas vent
holes, not the 2nd and third as in the picture.   Seems to work fine
now and no longer glows red hot.

Probably something to note for anyone who is using RTV -- the
alignment may be a tiny bit off.

On Jul 19, 2008, at 1:41 PM, neil N wrote:

> Hi David.
>
> I had to wonder too looking at the pics Michael posted.
>
> I just had a quick look at the Dometic service manual.
>
> The drawing on P.17 shows the tip of the peizo just across the first
> opening on LH side of the burner. (birds eye view, piezo at bottom)
>
> How would one have the burner too far outboard? Or is it a matter of
> it being rotated to the wrong position?
>
> I may have to re-check mine if that is possible.
>
> Thanks,
>
> Neil.
>
> On Sat, Jul 19, 2008 at 12:07 PM, David Beierl
> <dbeierl@attglobal.net> wrote:
>> At 02:32 PM 7/19/2008, Michael Diehr wrote:
>>
>> Is the burner tube lined up correctly under the flue?  If it's too
>> far outboard that would explain why the piezo electrode is lit
>> up.  BTW is it really that bright, or is your camera emphasizing
>> the IR?
>>
>>
>> --
>> David Beierl - Providence RI USA -- http://pws.prserv.net/synergy/Vanagon/
>> '84 Westy "Dutiful Passage," '85 GL "Poor Relation"
>>
>
>
>
> --
> Neil Nicholson '81 JettaWesty "Jaco
> http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines
> http://web.mac.com/tubaneil
> http://tubaneil.googlepages.com/