

| Subject: | Re: 87 Westy Sliding Door Adjustment |
| From: | Dave Mari |
| Date: | Mon, 21 Jul 2008 09:52:57 -0700 |
Roger, I have adjusted and replaced several sliding doors with no problems, but this is the 1st time I have seen this problem with the rear outside track upper bearing dropping at the last 1 inch. The door will shut fine with a little inward presure on the rear of the door or if the two rear mounting screws are loosen by 1 turn. I did not see adjustment of that assy in the Bentley. Dave --- On Mon, 7/21/08, Roger Whittaker <rogerwhitt1@gmail.com> wrote: > From: Roger Whittaker <rogerwhitt1@gmail.com> > Subject: Re: 87 Westy Sliding Door Adjustment > To: "Dave Mari" <vw4x41987@yahoo.com> > Cc: vanagon@gerry.vanagon.com > Date: Monday, July 21, 2008, 11:48 AM > dear dave > my mechanical skills are considered moderate at best yet ] > the door has been an easy fix for me on both the 69 type 2 > and my current 89 > vanagon > before you start .. have some one who is mechanical help > you > have you or them sit in the van and watch carefully to see > what exactly > happens > when the top guide falls out of the track ... > see if it is the track or the small arm that holds the > guide wheel > > lay under neath the van and watch what happens there as > well > the bottom guide wheel and the small arm that hold it in > place could be > failing somehow > > watch the guide under the skirt running astern ... what > does it do ... > if you dont have a bently manual ... GET ONE NOW > attempt nothing with out guidance form the bently > > now that you have a bently > there are explicit instructions on how to line up and/or > repair the sliding > door > it takes two people > you require a rubber hammer and a rubber wedge to remove > the cover over the > side guide that runs astern on the outside of the van > you should measure the distance from the ground to the > bottom of the door > then have something that height nearby to set/rest the > bottom of the door on > on as you remove parts ... > your helper should be suitable for the job as inexperience > can lead to a > door falling down so this is not a job for your > distractable 7-14 year old > ... > with bently in hand you should have little trouble sussing > out and affecting > repairs > good luck .. > yours > On Mon, Jul 21, 2008 at 6:04 AM, Dave Mari > <vw4x41987@yahoo.com> wrote: > > > Hi all, > > > > > > I looking for some tricks/info on adjusting my 87 > Westy Sliding door, as > > the TOP bearing on the rear swing out track is droping > out the track at the > > very end right before the door if is fully closed and > the bearing turns left > > into the van. > > > > > > > > TIA, > > Dave > > 87 Syncro Westy ZETEC! > > > > > > -- > roger w > There are two kinds of jobs in the world: > Picking up garbage and telling people things. > Successful people do both, with the same good attitude. > (riw) > ----------------------------------------------------------- > View the growing list of video work at: > http://revver.com/find/video/?query=LastonLastof&search_on=owners > and ... older work at > http://video.google.com/videoplay?docid=-7135104650374818257 > http://video.google.com/videoplay?docid=3259745150182742364
Have something to add on this topic today? Revive this thread in the forum »