

| Subject: | Re: Dometic won't light troubleshooting |
| From: | Michael Diehr |
| Date: | Mon, 21 Jul 2008 12:07:24 -0700 |
Odd -- I repeated my prior test -- ran the fridge on max all day, then turned it to about 50% in the evening. This time the fridge stayed lit all night and hasn't gone out yet (about 20 hours straight). Conditions (temp, wind) were roughly the same, so no clear reason why it'd be different this time. I wonder if it's possible for the thermostat control to have a "dead spot" on it? On Jul 20, 2008, at 10:17 AM, mdrillock wrote: > The fridge flame only has 2 sizes, idle and full speed. > > All the temp dial setting does is affect how often and how long it > runs > at full speed. > > IIRC, David Beierl years ago modified an led panel to indicate which > flame speed was burning. He published the circuit mods on this list > and > had a link to a diagram to duplicate it. Maybe that stuff is still > around and his recent return here is certainly well appreciated. > > Mark > > > > > Michael Diehr wrote: >> Update -- 90% there... >> >> After the acid bath treatment, I reinstalled the dometic and fired it >> up on LPG. Ambient temperature in the mid 70s. Within 2 hours it >> was >> below 50, and within 6 hours it had made ice cubes and was down to >> 36F. I don't think it's ever worked that well before. >> >> At that point I turned down the thermostat to about 1/2 way, and went >> to bed. The night was still, very little wind, ambient temps dropped >> to about 60. Woke up this AM and the flame had gone out, but it lit >> right back up again. Maybe turning it down from "max" was pushing >> my luck? >> >> I wanted to again thank all of your for the fast responses & great >> advice. This list is an amazing resource :-) >> >> I'll leave it on max and see if it goes out again. Any thoughts as >> to why it'd go out overnight when not set on max? Perhaps the "low" >> flame size is too small, or perhaps the thermocouple is not getting >> enough heat on low? Does "max" force the flame size to "high" at all >> times, or is "max" just the highest thermostat setting (meaning the >> flame size can still go to "low" if it gets cold enough?) >> >>
Have something to add on this topic today? Revive this thread in the forum »