Try the simple thing first....it is very common for the washer nozzles to clog up.

Anthony
'89 Syncro GL (Hidalgo)

--- On Fri, 7/25/08, Evan Mac Donald <vanagon_dad@SBCGLOBAL.NET> wrote:
From: Evan Mac Donald <vanagon_dad@SBCGLOBAL.NET>
Subject: Re: washer fluid won't work
To: vanagon@GERRY.VANAGON.COM
Date: Friday, July 25, 2008, 3:23 PM

There are a couple of things to try, for trouble-shooting.

  The first item, you already checked - there is actually fluid in the tank!
(it happens....!)

  Next, does the pump run when you lift on the lever? It does make some noise,
and if you leave the engine off, and listen for it, it will be obvious. If you
do not hear it, there are a couple of things that may be the problem. A fuse is
one, but not likely, if the wipers are functional. It may be the pump has locked
up over its stretch of inactivity. Or the momentary contacts in the switch (on
the steering column) have gotten crudded up, and don't send any power to
the pump anymore. Can you do any mechanical work yourself? If you can, check to
see if power is getting to the pump. You will need a helper, but it is easy to
do. Pull the connector off of the pump, whick is tucked up on top of the tank,
under the driver's floorboards, and put a test light in that connector. It
should light when the lever is lifted.

Jenny Fontaine <jensmiles2@HOTMAIL.COM> wrote:
  Hi All,
I have a '87 Westy and while my front wipers work, it won't dispense
any washer fluid.
The fluid came out last year, but when I got her out of storage this summer,
nothing.
Yes, I checked that there was washer fluid in the tank.
Is this related to a possible blown fuse or has the fluid dispenser broken?
Any suggestions would be appreciated.
-Jen
'87 Westy
_________________________________________________________________
Keep your kids safer online with Windows Live Family Safety.
http://www.windowslive.com/family_safety/overview.html?ocid=TXT_TAGLM_WL_family_safety_072008