Thanks, Scott.

This is a 3-wire O2 sensor.

On Sat, Jul 26, 2008 at 4:58 PM, Scott Daniel - Turbovans <
scottdaniel@turbovans.com> wrote:

> re "I can not figure
> out where these harnessess mate with the vehicle main harness. '
>
> Do you have a wiring diagram for the ECU  ?
> off the top of my head I think the ECU only interfaces with the van for :
> Batt power
> Ign on power
> start signal
> ( grounds of course )
> that would be it, rigth ?
> and I can well imagine they have a stand alone Oxygen sensor system, i.e.
> not integrated like we're used to.
> single wire or 3 wire 02 ?
>
>
> ----- Original Message ----- From: "Chris S" <szpejankowski@GMAIL.COM>
> To: <vanagon@GERRY.VANAGON.COM>
> Sent: Saturday, July 26, 2008 12:50 PM
> Subject: Re: WANTED: Pictures of Syncro engine compartment
>
>
>
>  DJ-code is a European WBX with 112 hp and a DIGIJET ECU.  The engine code
>> is
>> at the base of the oil breather tower:
>>
>>
>> http://i16.photobucket.com/albums/b7/misterpolak/WBX_transplant/WBXDJenginenumber.jpg
>>
>> The myth is that no DJ-code engines came with a Catalytic converter or O2,
>> which is not true for all of them.  The DJ wiring harness is in two
>> pieces,
>> one main ECU and a secondary ECU which controlls O2, and other functions.
>> They both sit behind the left taillight like a 1.9L ECU.  I can not figure
>> out where these harnessess mate with the vehicle main harness.  I also
>> don't
>> know how this is related to the MV Digifant harness.  It's pretty obvious
>> in
>> my '84 as the interface is a large box on the "firewall".  Any pictures of
>> the left side of the engine compartment would help.
>>
>> Chris.
>>
>> On Sat, Jul 26, 2008 at 2:20 PM, Paul Connelly <
>> vanagonhummingbird@gmail.com
>>
>>> wrote:
>>>
>>
>>  Hey Chris,
>>>
>>> Happy to take any pictures that you would like, but how do I know if its
>>> MV
>>> or DJ?
>>>
>>> Cheers, Paul.
>>> 1986 Syncro Westy - Hummingbird
>>>
>>>
>>> On Sat, Jul 26, 2008 at 8:43 AM, Chris S <szpejankowski@gmail.com>
>>> wrote:
>>>
>>>  I'm the process of installing a DJ-code WBX from a euro-Syncro into my
>>>> '84
>>>> Westy.
>>>>
>>>> If you have pics of a Syncro engine compartment, MV of DJ engine, could
>>>> you
>>>> email them to me?  I'm trying to nail some details of the harness
>>>> layout,
>>>> etc.
>>>>
>>>> DJ-code engine compartment pics will be especially helpful.
>>>>
>>>> Thanks a billion!
>>>>
>>>> Chris S.
>>>>
>>>>
>>>
>>>
>