

| Subject: | Re: Got the wrong Vitrifrigo! |
| From: | Jeffrey Vickers |
| Date: | Thu, 31 Jul 2008 18:13:38 -0700 |
Nice job on the drawer, Richard. I'm just beginning that project myself. Did you do a paint match for the drawer front or did you salvage the fridge door? Jeff / San Anselmo On Jul 31, 2008, at 4:29 PM, Automatic digest processor wrote: > Date: Thu, 31 Jul 2008 15:11:34 -0600 > From: Richard A Jones <jones@COLORADO.EDU> > Subject: Re: Got the wrong Vitrifrigo! > >> The AC power pack is an add-on, if it is indeed not in the box then >> they >> should send you one and tell you how to attach and connect it. >> >> FWIW, I've only run mine on AC very briefly, as I get 5-7 days on >> the 100 >> a/h deep cycle battery. >> >> Karl > > Karl: Based on my sample (of 3, maybe 4!) it appears that the > external > power box and the sliding fridge latch go together; internal > power stuff and pin latch go together. Is that correct? > > I watched my "Invitrio" on a couple of trips and in warm/hot > conditions--interior of the camper >80 degrees, mine ran > 4 min, then off 8 min. So 1/3rd of the rated 2.7 amps/hr > means about 1 amp per hour max. Much, much less at night > when temps were ~50 degrees; maybe 35-45 minutes between > running. > > A pic of how I mounted my control box under the drawer is at: > http://jones.colorado.edu/jones/Vitrifrigo > I put a little 12V rocker switch up there with it to control > the 12V from the battery--so I can clean mine out, leave the > door open to dry--and have the light off. ;-) > > And, Karl, thanks for discovering this fridge and telling > all of us about it!! > > Richard
Have something to add on this topic today? Revive this thread in the forum »