I know that with my '84 in North Dakota, anything and everything I could
plug on the front was plugged in the winter.

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Joy Hecht
Sent: Tuesday, August 05, 2008 8:05 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Why plug the dash air intake screen?

My A/C hasn't worked for years, but not being able to shut off the heat is a
nuisance at times.

Joy

and Matilda, now back in Newfoundland perhaps for a while...

(and back on the list after a long time off)

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Chris S
Sent: Tuesday, August 05, 2008 9:57 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Why plug the dash air intake screen?

RE:  blocked air fresh air intake.

Once the foam seals break down inside of the air distribution box you can't

shut off the flow of air.  If the Vanagon has A/C this greatly reduces its

effectiveness. The cheap fix is to seal off the outside air intake instead

of slightly longer method:  http://www.knology.net/~vw/vanagon/dash/

Chris S.

2008/8/5 Oliver Mueller-Heubach <groundhogging@mac.com>

> I noticed on the Craig's '80 parts Westy that someone crammed cloth

> behind the screen inside the front grill. My own '80 Westy had,

> similarly, the screen closed off with layers of black tape. Is this

> something to do with non-functioning vents? Cold air in winter? Bees/

> Insects getting in? The cloth in the parts van intake made me wonder

> if pouring water into the vents onto this "sponge" would create a

> rudimentary swamp cooler- but mold would be insane (then again, the

> cloth was more dirty than moldy..).

>

> Also, I have one piece of card/chipboard heat-welded to the back of

> my grill- the other, which there appears to have been, is gone. I

> assume these are for directing air into the aforementioned intake.

> 1-how much more airflow is there with both boards in place, and 2-

> how have folks attached a new board when the plastic heat welds have

> broken off?

> Thanks!

> ollie

>

> Oliver Mueller-Heubach

> groundhogging@mac.com